Electric cords in the media room or home office tend to have a nasty habit of becoming tangled messes. Not only are tangled cords unsightly, but then can also represent a safety hazard. Instead of dealing with a "rat's nest" of tangled cords on a day-to-day basis, use these tips to help get them conveniently organized.Electric Cords in the Home OfficeBecause the average home office contains so many electrical devices, the wires can often be quite difficult to keep untangled and organized.
In fact, just the cables, wires and cords from your home computer alone can form a fairly tangled mess. To get them organized, start by finding out how many components need their own surge protector or AC power connection. Grouping these electrical devices together will make it easier to plug them in without running wires around the room. If your component wires and cables are too long, try replacing them with shorter ones to keep things neat. Using a USB hub can also help to keep cable clutter under control.
Use cable ties, clips or Velcro straps to tether groups of cables together, making them tidier and easier to deal with. Split tubing can also be used to tame cable clutter, allowing multiple cables to be hidden inside. If your desk hutch does not have a hole in the back, drill one so that you can slip cables and wires through, effectively hiding them behind your desk. Or, invest in a few wireless computer peripherals to eliminate cable clutter altogether.
Electric Cords in the Media RoomBecause of the many different electronic components and speakers needed, the media room usually contains a plethora of cords, wires and cables. Although many of the home office cord control tips listed above will work equally well for the media room, there are also other techniques you can use. In some cases, you can even carefully hide many of the wires behind the room's wood baseboard trim. To use this technique, first gather the individual cords into bundles, each containing approximately two to three cords.
Bind them together at several points along their length, essentially forming one thick cable out of the individual wires. Don't make the bundles too thick, since the overall goal is to hide them behind the baseboard. Run kf-terminals Cord End Terminals these cable bundles down the wall unobtrusively, until they reach the floor. Then, loosen the sections of baseboard between the cables and the closest electrical outlet. Just pull the baseboard out far enough for the cables to slip behind it. Tuck the cords gently behind the baseboard trim, taking care not to crimp or bend them.
Once the wires are hidden, gently tap the baseboard with a hammer. Although you shouldn't try to get the baseboard back into its original position flush against the wall, in most cases, you'll be able to get it close enough to look good. Of course, this method works best for equipment and wires that you are not planning to move anytime soon.
